1/16/2011

Camera Flash Speedlite Speedlight fit for CANON EOS SLR/DSLR Canon EOS 5D Mark II, 1Ds Mark [ IV / III / II / I ], 1D Mark [ III / II N/ II / I], 7D, 5D, 60D, 50D 40D, 30D, 20D, 10D, 3, 1V, 550D, 500D, 1000D, 450D, 400D, 350D, 300D(YN460II)

Camera Flash Speedlite Speedlight fit for CANON EOS SLR/DSLR Canon EOS 5D Mark II, 1Ds Mark [ IV / III / II / I ], 1D Mark [ III / II N/ II / I], 7D, 5D, 60D, 50D 40D, 30D, 20D, 10D, 3, 1V, 550D, 500D, 1000D, 450D, 400D, 350D, 300D(YN460II) Review





Camera Flash Speedlite Speedlight fit for CANON EOS SLR/DSLR Canon EOS 5D Mark II, 1Ds Mark [ IV / III / II / I ], 1D Mark [ III / II N/ II / I], 7D, 5D, 60D, 50D 40D, 30D, 20D, 10D, 3, 1V, 550D, 500D, 1000D, 450D, 400D, 350D, 300D(YN460II) Feature


  • This flash speedlight YN-460II is designed for Canon EOS 5D Mark II, 1Ds Mark [ IV / III / II / I ], 1D Mark [ III / II N/ II / I], 7D, 5D, 60D, 50D 40D, 30D, 20D, 10D, 3, 1V, 550D, 500D, 1000D, 450D, 400D, 350D, 300D
  • The appearance is very nice. it has a lot of function, such as index powerful, simple operation, full-featured, and completed equipped. Item included Reflector/Soft board / Diffusing board.
  • Flash head, Battery cover, Lock ring, Hot shoe mount, Connect point.
  • Mode select button, Pilot signal light, Mode Button, Power Switch
  • Mode select indicator, Test button a nd Flash power level button



Camera Flash Speedlite Speedlight fit for CANON EOS SLR/DSLR Canon EOS 5D Mark II, 1Ds Mark [ IV / III / II / I ], 1D Mark [ III / II N/ II / I], 7D, 5D, 60D, 50D 40D, 30D, 20D, 10D, 3, 1V, 550D, 500D, 1000D, 450D, 400D, 350D, 300D(YN460II) Overview


This new designed version of YN-460 II can be used on Sony and Minolta Camera directly, the only difference bwteen it and the first version is the hot shoe.1, We increased the Flash index from 33 to 38(at 35mm focal length?ISO 100 in meters) and 53 (at 35mm focal length?ISO 200 in meters);2, This YN-460 II has the output power fine-tuning fucntion, If the 7 output power can't meet your demand, You can press " + " or " - " buttons to fine tune the output power of the flash with step length of 1/7 ev in order to obtain finer exposure control, so there are 48 step length for you to choose. ( There is just 7 setp length for the first version. )3, The recyling time is much faster than the first version.Flash index: 33/ISO100 53/ISO200. Circuit design: IGBT. Up/down ward angle: 0-90 degree. Left/right angle: 0-270 degree. Power Source: 4 X AA size batteries (Alkaline or Ni-MH are usable) Battery Life: 100 - 1500 times (with AA alkaline batteries). Recycle Time: Approx 2 sec(with AA alkaline batteries). Color Temperature: 5600K Flash Duration: 1/800S - 1/20000S. Flash adjustment: "7 difference flash power level ( 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64). Optic Mode: M, S1, S2. Power Saving: " Stand by mode, 30mins to power off mode. 60mins to power off when using the optic mode. " Package Including: 1xFlash light, 1xProtector bag, 1xMini stand and 1xManual in English.


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Jan 16, 2011 07:28:55

1/14/2011

Hahnel Combi TF Wireless Remote Control and Wireless Flash Trigger for Nikon SLRs

Hahnel Combi TF Wireless Remote Control and Wireless Flash Trigger for Nikon SLRs Review





Hahnel Combi TF Wireless Remote Control and Wireless Flash Trigger for Nikon SLRs Feature


  • Wireless remote shutter release, plus a remote flash trigger
  • Upto 100m range
  • Eliminates camera shake for long exposure
  • Supports auto focus, continous shooting, bulb mode & 4 second timer delay trigger
  • Can trigger a flash unit separately from the camera



Hahnel Combi TF Wireless Remote Control and Wireless Flash Trigger for Nikon SLRs Overview


The Combi TF combines two products in one - a wireless remote shutter release, plus a remote flash trigger.

Wireless remote shutter release
As a remote control, the Combi TF allows wireless control, upto 100m away, of the camera's shutter release, auto focus, continous shooting, bulb mode and 4 second timer delay trigger.

It is mounted on the camera hotshoe, and the supplied cable connects the receiver to the camera's data port.

Remote flash trigger
Remote trigger of a flashgun is also possible with the Combi TF. With the Combi TF receiver mounted on the camera hotshoe, the flashgun is placed into the hotshoe on the Combi TF receiver. Multiple flashguns can be fired simultaneously if additional Combi TF receivers are used (available separately). They can also be used to fire studio lights remotely, with the use of the optional cable.


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Jan 13, 2011 20:15:31

1/11/2011

Wireless Flash & Studio Grouping Trigger Receiver ONLY for Nikon SB-900, SB-800, SB-600, SB-400 Flashgun

Wireless Flash & Studio Grouping Trigger Receiver ONLY for Nikon SB-900, SB-800, SB-600, SB-400 Flashgun Review





Wireless Flash & Studio Grouping Trigger Receiver ONLY for Nikon SB-900, SB-800, SB-600, SB-400 Flashgun Feature


  • High quality wireless flash & studio grouping trigger, receiver can be used as a shutter remote cable(connection cable required and sold seperately)
  • Receiver can be set as group A, B or C individually and 7 different combination; multi-receivers available for each group.
  • Operating distance up to 100m, Low voltage design so you can use rechargeble batteries!
  • Receiver compitable with: Nikon SB-900, SB-800, SB-600, SB-400.



Wireless Flash & Studio Grouping Trigger Receiver ONLY for Nikon SB-900, SB-800, SB-600, SB-400 Flashgun Overview


PIXEL Soldier TF-372RX Wireless Flash Trigger with grouping function - Receiver Only for Nikon. This receiver can be used independantly or in a group within a TF-37x trigger system, or act as a camera shutter remote control. The grouping trigger can be set to any group from the transmitter. It can support shutter speed up to 1/320s (Max sync speed may vary depends on camera make/model and flashgun make/model).Pixel Soldier wireless trigger uses 2.4GHz frequency which is globally used. Specifically designed power saving function will let you use the transmitter and receiver for a longer period. The receiver is compitable with Nikon SB-900, SB-800, SB-600, SB-400 flashgun. Content included: TF-372RX x 1 pc, AAA battery x 2 pcs, 2.5mm to 3.5mm cable x 1 pc, 3.5mm to 6.35 adapter x 1 pc, instruction manual x 1 pc.


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Jan 11, 2011 08:18:10

1/09/2011

Flash Bounce Diffuser For Nikon SB900,SB-900,D700,D300 D200 D80 D60,D7000,D5000,D3100,D3000 flashgun

Flash Bounce Diffuser For Nikon SB900,SB-900,D700,D300 D200 D80 D60,D7000,D5000,D3100,D3000 flashgun Review





Flash Bounce Diffuser For Nikon SB900,SB-900,D700,D300 D200 D80 D60,D7000,D5000,D3100,D3000 flashgun Feature


  • The Flash Bounce Diffusers can create a Diffused Bare Bulb Effect.
  • Giving even coverage of light across the entire frame,
  • The Flash Bounce Deffuser is very easy to use and goes onto and off of your flash in seconds
  • It is small enough to fit easily into your bag or pocket.
  • It disperses the light over a wider area for a softer, more balanced and natural effect.



Flash Bounce Diffuser For Nikon SB900,SB-900,D700,D300 D200 D80 D60,D7000,D5000,D3100,D3000 flashgun Overview


Compatiable with: Nikon sb900. Package Includes: One Diffuser


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Jan 08, 2011 20:56:05

1/05/2011

JJC Remote Flash Trigger System (Double) for Metz 36AF, 48AF, 58AF

JJC Remote Flash Trigger System (Double) for Metz 36AF, 48AF, 58AF Review





JJC Remote Flash Trigger System (Double) for Metz 36AF, 48AF, 58AF Feature


  • 4 channels selectable
  • Working frequency: 433MHz
  • Power Input: Transmitter = 1x 23A battery, Receiver = 2x AAA batteries
  • Working distance: 30m
  • PC sync port on receiver module



JJC Remote Flash Trigger System (Double) for Metz 36AF, 48AF, 58AF Overview


The JJC Flash Trigger Set for two flashguns is ideal for mounting hot shoe flashes onto light stands. Standard shoe mount flash units can be mounted directly onto the integral hot shoe, which also provides the triggering power to the flash. Studio strobes may be fired from the PC Sync terminal on the side of the receiver. Four channels provide enough isolation from most other radio frequencies and enable you to work on a ""closed"" system.

The unit is powered by long life AAA and 23A batteries and works on 433MHz at a distance of up to 100ft (30 m) in an open area.

Includes ONE transmitter and TWO receivers to trigger two electronic flashes simultaneously.


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Jan 05, 2011 13:23:48

1/01/2011

LCD Display Dual Function Wireless Flash & Studio Grouping Trigger for Nikon Flashgun Units with i-TTL Support and All Major Studio Lights & Strobe Lights

LCD Display Dual Function Wireless Flash & Studio Grouping Trigger for Nikon Flashgun Units with i-TTL Support and All Major Studio Lights & Strobe Lights Review





LCD Display Dual Function Wireless Flash & Studio Grouping Trigger for Nikon Flashgun Units with i-TTL Support and All Major Studio Lights & Strobe Lights Feature


  • Support Nikon i-TTL including BL, FP functions. Compatible with Nikon CLS system.
  • Adjust exposure compensation via camera directly. Operation range: 65M
  • Support Nikon HSS, 1st Curtain and 2nd Curtain.
  • Max sync speed up to 1/8000s. LCD shows selected channel, battery life and function mode.
  • Support max. 5 groups, multi-receivers available for each group. Ability to trigger multiple flashguns and studio lights simultaneously.



LCD Display Dual Function Wireless Flash & Studio Grouping Trigger for Nikon Flashgun Units with i-TTL Support and All Major Studio Lights & Strobe Lights Overview


This product is compatible with all Nikon DSLR professional cameras and can trigger multiple speedlites and studio strobes simultaneously. It supports i-TTL functions and max sync speed is up to 1/8000s. The max working range is about 60-70 meters. The power consumption is quite low the typical standby time with a new CR-2 battery is 1000HRs (transmitter) and 500HRs (receiver). You can order extra receivers for your lighting system when needed.TR-331TX compatible with: Nikon CLS DSLR cameras: D3, D3s, D3x, D700, D300, D300s, D200, D90, D80, D5000, D3000. TR-331RX compatible with: Nikon CLS flash: SB-900, SB-800,SB-600, SB-400. Included Items: TR-331TX x 1pc, TR-331RX x 1pc, CR-2 lithium-ion battery x 2pcs, TR-331 holder x 1pc, 6.35mm Strobe PC Cable x 1pc, 3.5mm Strobe PC Cable x 1pc, Hot shoe protection cap x 1pc, Instruction manual x 1pc


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Jan 01, 2011 08:01:24